BLDC Motor High Speed For Hair Dryer 3V 1KW 110000RPM Go-Gold
Brushless Motor DC motor 3V output power 1KW rated speed 110000RPM bldc motor high speed for hair dryer
Brushless DC motors are motors without brushes and commutators that adjust stator currents to generate torque according to the position of permanent magnets in the rotor. Although it is called a "DC" motor, it is actually a permanent magnet synchronous motor (PMSM) that uses three-phase electricity. It is called "brushless DC motor" because it can replace brushed DC motors in many applications.
Essential details
Warranty:3years
Place of Origin:Guangdong, China
Brand Name:GO-GOLD
Model Number:KG-2212
Usage:High speed hair dryer
Type:Brushless Motor
Torque:Customised
Construction:Permanent Magnet
Commutation:Brushless
Protect Feature:Totally Enclosed
Speed(RPM):110000RPM
Continuous Current(A):0.75A
Efficiency:Other
Product Name:KG-2212
Packaging & delivery
Port: SHENZHEN
Picture Example:
Outer dimensions
Performance specifications
| Voltage(V) | 3V | Load current(A) | 0.75A |
| Input power(W) | 1KW | Rated speed(RPM) | 110000RPM |
Maintenance of DC Brushless Motors
- Before disassembly, use compressed air to blow off the dust on the surface of the motor and wipe it clean.
- Select the working location for motor disassembly and clean the on-site environment.
- Familiar with the structural characteristics and maintenance technical requirements of the motor.
- Prepare the necessary tools (including special tools) and equipment for disassembly.
- In order to further understand the defects in the operation of the motor, an inspection test can be conducted before disassembly if conditions permit. To this end, the motor will be tested with a load, and the temperature, sound, vibration, and other conditions of each part of the motor will be checked in detail. The voltage, current, speed, etc. will be tested, and then the load will be disconnected. A separate no-load inspection test will be conducted to measure the no-load current and no-load loss, and records will be kept.
- Cut off the power supply, remove the external wiring of the motor, and keep records.
- Select a suitable voltage megohmmeter to test the insulation resistance of the motor. In order to compare the insulation resistance values measured during the last maintenance to determine the trend of insulation change and insulation status of the motor, the insulation resistance values measured at different temperatures should be converted to the same temperature, usually converted to 75 ℃.
- Test the absorption ratio K. When the absorption ratio is greater than 1.33, it indicates that the motor insulation has not been affected by moisture or the degree of moisture is not severe. In order to compare with previous data, it is also necessary to convert the absorption ratio measured at any temperature to the same temperature.
Product Tags:
|
|
3V 0.75A High Speed Motor Hair Dryer Motor 110000RPM GO-GOLD Images
|
